Industrial Grade, Eco-Friendly Adhesive Remover
Adhesive removal can be a chore. The primary reason is that there are so many different types of adhesives. Reversing the chemistry to make the rock-hard deposits soft again can only be accomplished by using the correct adhesive remover. AcraStrip 600 BG Mod Auto is a superior industrial grade adhesive remover and mastic remover that can also be used for glue removal and waterborne adhesives.
Eco-Friendly Adhesive Remover
AcraStrip is an aqueous, green glue removal product that conserves natural resources, avoids toxic emissions, saves energy, and contributes to a safe and healthy environment. Green products such as AcraStrip 600 BG Mod Auto provide proper sustainability, composition, function, disposal, and cost-effectiveness. AcraStrip products are easily recycled through simple settling. AcraStrip can also be collected in drums or totes and allowed to settle for 24-48 hours.
AcraStrip 600 BG Mod Auto Adhesive Remover
AcraStrip 600 BG Mod Auto is an industrial solvent that is used to remove materials such as vinyl floor adhesive from many different surfaces with advanced efficiency. Vinyl floor adhesive makes a mess during installation; however, AcraStrip 600 BG Mod Auto can remove the adhesive quickly and easily. AcraStrip 600 BG Mod Auto works extremely well as an acetone replacement and does not have a strong odor like paint thinner or similar chemicals.
AcraStrip 600 BG Mod Auto Waterborne & Solvent Borne Adhesives Remover
Waterborne adhesives and solvent-borne adhesives are among the largest classes of adhesive products. The polymers used for water and solvent born adhesives can be soluble thermoplastics, elastomers, or polymer dispersions (lattices). These adhesives have excellent shear strength, so they are difficult to remove using standard solvents. However, acetone replacement AcraStrip 600 BG Mod Auto can remove waterborne adhesives and solvent-borne adhesives safely and effectively.
High-Efficiency Mastic Remover
AcraStrip 600 BG Mod Auto can specifically be used as a mastic remover in numerous types of automotive, architectural, and aerospace applications. During production, mastic and glue need to be removed from tools and applicators where overspray exists. Acrastrip can be used in a sprayer or on a wipe for these contaminated surfaces. When removing cured mastic and adhesives from parts/tools it is recommended that parts/tools are submerged in Acrastrip at room temperature or in heated Acrastrip for quicker cleaning. AcraStrip 600 BG Mod Auto is a direct acetone replacement and is free of strong odors that are often associated with paint thinners and similar chemicals.
Safe Glue Solvent Alternatives
AcraStrip 600 BG Mod Auto industrial grade acetone replacement is a powerful bio-friendly aqueous cleaning compound that replaces Acetone and other hazardous solvents. This powerful, eco-friendly compound works as an adhesive remover and mastic remover, and has glue removal aspects as well. The benefits of this earth-friendly adhesive remover include:
- Replaces acetone
- Fully recyclable
- Slow evaporating
- Safe to use, store & dispose
- Does not dry out
- Low odor
- High efficiency
- Made in the US
Cost-Effective Alternative to Acetone-Based Adhesive Remover
Eco adhesive remover and mastic remover products typically last 5-10 times longer than most solvents due to their slow evaporation rate and reusability. Solvent users lose 30-35% of their solvents in the workplace due to evaporative losses from buckets and open tanks. Acetone alternatives such as AcraStrip have slower evaporation rates, which provides for only negligible losses. In addition, many solvents lose their ability to clean for a long period due to their load capacity. Since AcraStrip 600 BG Mod Auto can separate waste from reusable cleaner, this acetone alternative has a longer half-life compared to traditional solvents, allowing for an overall increase in cost savings.